TIMING A 6800

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

TIMING A 6800

CL DAVIS
Does anyone know how to set the timing on a 6800?  If so please e-mail instructions to me at "CLDAVIS@Q.COM."  THANKS!
Reply | Threaded
Open this post in threaded view
|

Re: TIMING A 6800

cr250
Its electronic, no adjustment other than the air gap.
3-YT3600's, 2-YT 6800's, 1-YT6700 for parts.
JIM
Reply | Threaded
Open this post in threaded view
|

Re: TIMING A 6800

JIM
In reply to this post by CL DAVIS
IF YOUR TALKING BOUT HOW TO SET OHV S I FOUND SITE STATES ON A YAMAHA 18 HP V-TWIN SHOULD BE IN THE MIDDLE OF 0.0031 - 0.0047 AT TOP DEAD CENTER SET MY YT6700 SAME MOTOR TO 0.0035 TO 38 CLOSE TO MIDDLE MINE RUNS GOOD START UP AT 0.0035 SO LEFT IT THERE 2 YEARS AGO THIS YEAR GOIN TRY UP LIL MORE  FEELER GAGE U WILL NEED BUY GOES 0.30 - 0.33 - 0.35 - 0.38 AND 0.40MM THIS FEELER GAGE IS THE BIGGER OF THE 2 DIFF GAGES THE SMALLER GAGE WOULD BE USED FOR SMALLER MOTORS
LIKE BRIGGS AND TECUMSA
Reply | Threaded
Open this post in threaded view
|

Re: TIMING A 6800

cr250
Quit yelling, timing and valve clearance are 2 different things. P.S. all caps is considered yelling FYI
 
3-YT3600's, 2-YT 6800's, 1-YT6700 for parts.